User manual

page | 55
5. Select the desired option by using the ◄ or ► keys.
If the Show Video Signal is set to Yes, then the current input resolution will be
displayed below the current PC name. This is the default setting.
If the Show Video Signal is set to No, then only the PC name will be displayed.
See Show PC Name (page 52) for more information on hiding / displaying
the PC name.
6. Once the desired option has been selected, press the Esc key.
7. The following message will be displayed:
8. Press the Enter key to select the Yes option and save the changes.
To discard changes, press the ► key to select the No option, then press Enter.
9. To return to the previous screen, without making changes, press the Esc key.
Basic Operation
OSD Menu
Yes No
Save Before Exit?
Esc Back
03 PC03
1920 x 1200
Video Signal