User manual

page | 57
6. Use the ▲ or ▼ keys to select the Output Resolution option.
7. Select the desired resolution by using the ◄ or ► keys.
The following resolutions are available: 1024x768, 1280x1024, 1280x720,
1360x768, 1600x1200, 1680x1050, 1920x1080, 1920x1200, and Auto.
8. Once the desired resolution has been selected, press the Esc key.
9. The following message will be displayed:
10. Press the Enter key to select the Yes option and save the changes.
To discard changes, press the ► key to select the No option, then press Enter.
11. To return to the previous screen, without making changes, press the Esc key.
Basic Operation
OSD Menu
Settings
F1
F2
F3
F4
Full view
PIP view
Quad view
PAP view
Esc
Enter
W S
A D
Exit
Select
Navigate
Change
Previous Page
Output Resolution
Shrink Control
EDID Mode
OneClick Switching
PIP Scan Period
Load Factory Default
Main Menu
Information
Exit
1280x1024
Keep Ratio
External
Wheel
10 Sec
Yes No
Save Before Exit?
Esc Back
Important
Before changing this setting, make sure that the connected display can
support the selected output resolution. If an unsupported resolution is
selected, you will need to set the output resolution using the RS-232
command set. See the #set_output command for more information.