Specifications

8
CONNECTING THE DVIKVM
EXTRA LONG RANGE EXTENDER OVER ONE CAT5
How to Connect the DVIKVM Extra Long Range Extender Over One CAT5
1. Connect the DVI source to the Sender Unit using the provided DVI cable.
Connect the DVI monitor to the Receiver Unit using a DVI cable.
2. Connect the included USB cable from the computer to the Sender Unit.
3. Connect the USB devices to the Receiver Unit.
4. Connect a Cat-5e or Cat-6 cable between the Link port on the Sender Unit
and the Link port on the Receiver Unit.
NOTE: If terminating network cables in the fi eld, please adhere to the TIA/
EIA568B specifi cation (see page 11).
5. Connect the 5 V DC locking power supplies to the Sender Unit and Receiver
Unit. Do not overtighten the locking connectors. Plug the two (2) AC power
cords from the power supplies to available electrical outlets.
Wiring Diagram for the DVIKVM Extra Long Range Extender Over One CAT5
EXT-DVIKVM-ELR
CAT5 LINK CABLE
(Up to 330 ft)
DVI CABLE
USB CABLE
Sender
Computer
DVI Monitor
USB Keyboard
USB Mouse
Receiver
e
r
R
ecei
v
er
Attention: This product should always be connected to a grounded
electrical socket.