Specifications

1
Congratulations on your purchase of the Gefen DVIKVM Extra Long Range Ex-
tender Over One CAT5. Your complete satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to install and simple to operate.
The Gefen DVIKVM Extra Long Range Extender Over One CAT5
The DVIKVM Extra Long Range Extender Over One CAT5 extends any DVI and
USB source to a monitor, touch screen display, or other digital signage applica-
tion over a distance up to 330 feet (100 meters) using one Cat-5 cable. USB 2.0
data rates up to 100 Mbps are supported in addition to backward-compatibility
with USB 1.1. The Receiver Unit allows the connections of up to three (3) USB
devices, providing access to printers, scanners, cameras, external storage me-
dia, digital signage, and automated control systems. This product uses Gefen
ELR technology, allowing DVI and USB signals to travel along the same Cat-5
cable, reducing cabling costs and providing easier installation.
How It Works
Place the DVIKVM Extra Long Range Extender Over One CAT5 Sender Unit next
to the DVI source. Use the included DVI cable to connect the computer or other
DVI source to the Sender Unit. Use the supplied USB cable to connect the USB
host (source) device to the USB port on the Sender Unit. Connect the Receiver
Unit to the monitor or digital signage display with a DVI cable. Connect the USB
devices to the Receiver Unit. Use one Cat-5 cable, up to 330 feet (100 meters),
to connect the Sender Unit to the Receiver Unit. Connect the included locking
power supplies to the Sender Unit and Receiver Unit, and then connect both
power cords to available electrical outlets.
INTRODUCTION