User manual

page | 3

Getting Started

Back

ID Name Description

1 DVI In Connect the included DVI cable from this

connector to the DVI source.

2 DVI Local Out Used to monitor the DVI source connected

to the DVI In port. Connect a DVI cable from

this port to a local display.

3 RS-232 Connect the included RS-232 cable from this

port to an RS-232 device.

See Using RS-232 for details.

4 Line In Connect a 3.5mm mini-stereo cable from the

Line Out jack on the multimedia PC to this

jack.

5 USB Connect a USB cable from the computer to

this USB port.

6 LAN Connects the Sender unit to the network

(or directly to the Receiver unit) using an

Ethernet cable.

7 5V DC Connect the included 5V DC locking power

supply to this power receptacle.

543 6 7

Sender Unit Layout