User manual

page | 4
Front
ID Name Description
1 Power This LED glows steady blue when the unit
is connected to an AC outlet and the unit is
powered ON.
2 Link This LED glows steady green when the
Sender and Receiver units are connected
using Ethernet cable and successfully
passing video.
3 Reset Press this button to reset the unit.
See Performing a Factory Reset for
instructions on restoring the Receiver unit to
factory-default settings.
4 -/Select This button serves two purposes: 1) Press
this button to decrement the channel number.
See Setting the Video Channel for details.
2) Press and hold this button to select the
channel shown on the screen.
5 +/USB This button serves two purposes: 1) Press
this button to increment the current channel
number. See Setting the Video Channel
for details. 2) Press and hold this button
to switch between USB modes. See USB
under Multicast Mode for details.
6 Line Out Connect a 3.5mm mini-stereo cable from
this jack to a pair of powered speakers.
See Audio Connections for details on
connecting audio source and speakers.
7 USB Connect up four USB devices to these USB
ports.
Getting Started
Receiver Unit Layout
1 2
3 6 75
4