User manual

page | 10
Getting Started
Installation
Supplementary Connections
► USB (see USB Control for more information on using USB devices)
1. Connect a USB cable from the computer to the USB port on the Sender unit.
2. Connect up to two USB devices to the Receiver unit.
► Audio (see Audio Connections for more information on using audio devices)
3. Connect a 3.5mm mini-stereo cable from the Line In jack on the Sender unit to an
audio source.
4. Connect a pair of powered speakers (or another audio output device) to the Line Out
jack on the Receiver unit.
► RS-232 (see Using RS-232 for more information on connecting RS-232 devices)
5. Connect the included RS-232 cable from the PC or automation system to the
RS-232 port on the Sender unit.
6. Connect an RS-232 cable from the Receiver unit to the RS-232 device to be
controlled.