User manual

page | 15
3. Press and hold the -/Select button until the channel number disappears from the
screen. The Receiver unit is now changed to the channel 255.
4. After a few moments, the screen will go blank and the IP address of both the Sender
and Receiver unit will be displayed in the lower-right corner of the screen.
5. Press and release the +/USB button to return to channel 0. Once channel 0 is
displayed on the screen, press and hold the -/Select button to save the channel
change.
Channel:255
Trying to nd the gateway...
FW: 12-Dec-24 b6e4
Local IP: 169.254.8.168
Remote IP: 169.254.9.227
ID: 82507DA9C07A
Local IP = Receiver unit
Remote IP = Sender unit
Channel:255
Basic Operation
Operating the DVI KVM over IP with Local DVI Output