User manual

CONNECTING AND OPERATING THE GEFEN TV SWITCHER
DEVICE BUTTONS
AUTOMATIC SWITCHING
4
How to Connect the Gefen TV Switcher to your devices
1. Connect the supplied cables from the HDTV HDMI sources into the Gefen TV Switcher
inputs.
2. Connect the cable from your display (monitor or projector) into the HDMI out of the
Gefen TV Switcher.
3. Plug the 5VDC power supply into the Gefen TV Switcher.
How to Control the Gefen TV Switcher
Use the RMT4-IR remote control to toggle between sources or press the input button.
EQ Button
Input Select Button
By pressing the EQ button you allow the switcher to do a pre-emphasis on the signal.
Automatic switching is done very easily. Whenever you power on your device, on a
certain input, that input will become active. If you power down the device on that input,
the switcher will revert back to the previous input that was active.
The remote and input select button will always allow you to switch manually. The remote
will switch discretely to any input, while the input select button will allow you to toggle
between inputs.
Allows you to toggle between inputs.