User manual

ONE-TOUCH RECORDING
17
Use on the remote to select either Yes or No and press . Selecting No will
continue the recording process. Selecting Yes will stop the recording process and
save the movie to the currently selected media. Note that even though this dialog
is displayed, the recording process is still taking place. The recording will not stop
until you select Yes. NOTE: You cannot pause a recording by pressing the PAUSE
button. You can only STOP a recording.
Most of the time you will want to view the source before recording it. However, it is
possible to begin a one-touch recording directly from the HOME menu:
1. From the HOME menu, press the RECORD button on the remote.
2. The HD-PVR will switch from the HOME menu to the source. However, you will
be asked “Record, Are you sure?”. This prevents an accidental recording directly
from the HOME menu, since the source is not currently being viewed.You will need
to select Yes or No from the dialog. Selecting Yes will begin the recording process.
Selecting No will allow you to view the source.
To stop the recording process, press the STOP button on the remote control. The
HD-PVR will ask you if you are sure you want to stop recording.
3. Press the HOME button on the remote to return to the HOME menu.
NOTE: If you’re displays jumps slightly when starting a recording, it will not be
seen in the movie during playback. This is simply due to a synchronization process
between your display and the HD-PVR. This behavior is completely harmless.