User manual

LEARN REMOTE & RESET REMOTE

The Gefen HD-PVR remote has a number of user conﬁ gurable keys that can be

programmed with IR codes from other devices. The IR codes are transmitted through

the IR blaster on the back of the unit. This feature allows you to control your other

devices using the HD-PVR remote. There are a number of user-deﬁ ned keys on

the HD-PVR remote that can be programmed to control power, volume, channel,

etc. Please see the IR Remote Layout at the beginning of this manual for a listing

of the keys that are programmable.

Learn Remote

From the Setup Utilites menu, choose Learn Remote with and press .

1. Press the key on the HD-PVR remote which you would like to learn.

2. Now, press the key on the device’s remote that you wish to assign.

For example, if you want to assign POWER ON/OFF for your DVD player, you could

press USER2, on the PVR remote, in Step 1. Then press the power button on the

DVD player for Step 2. You would then need to connect the IR blaster to the DVD

plauyer so it would be able to accept the commands.

Reset Remote

Resetting the remote will erase all user-deﬁ ned functions, restoring the remote to

factory settings. You will be asked to conﬁ rm this action if you select it. Use this

only IF you wish to re-learn the remote keys. NOTE: Once a key has been learned,

it cannot be re-learned until you perform a Reset.