User manual
44
RS-232 SERIAL COMMUNICATION
• Type in any UART command and press the “Enter” button on the keyboard of
the PC, after the “a:\>” prompt to execute it.
• For example, type in “t app 0x61773002” and press “Enter” to change the input
selection to HDMI 2, as shown below. (Note that there is one space between t
and a, and one space between p and 0.
• After the command has been executed, HD-PVR will return the status and give
“a:\>” prompt again, to accept next command.
RS-232 UART Commands
Function UART command
--------------------------------------------------
POWER t app 0x61771000
MUTE t app 0x61771002
UP t app 0xfffe0000
DOWN t app 0xfffe0001
LEFT t app 0xfffe0002
RIGHT t app 0xfffe0003
ENTER t app 0xfffe0011
REV t app 0x6177100a
FWD t app 0x6177100b
STOP t app 0x61771010
PLAY/PAUSE t app 0x61771011
ZOOM t app 0x61771014
TO_CARD t app 0x61771015
REPEAT t app 0x61771016
TO_HDD t app 0x61771018
RECORD t app 0xfffe000e
INFO t app 0x6177101b
HOME t app 0x61773000
HDMI1 t app 0x61773001
HDMI2 t app 0x61773002
COMPONENT t app 0x61773003
SVIDEO t app 0x61773004
COMPOSITE t app 0x61773005
SNAPSHOT t app 0x61773006