User manual

page | 3
Introduction
ID Name Description
1 IR In/Ext Connect an IR Extender (Gefen part no.
EXT-RMT-EXTIRN) to this port. Alternatively,
connect a mini-mono 3.5mm cable from
this port to the output of an automation
system with an electrical IR output.
2 LAN Connects the Sender unit to the network (or
directly to the LAN port on the Receiver unit)
using an Ethernet cable.
3 Reset Press this button to reset the Sender unit.
See Resetting a Unit (page 40) for
instructions on restoring the Sender unit to
factory-default settings.
4 5V DC Connect the included 5V DC power supply to
this locking power receptacle.
5 Power This LED indicator will glow bright green
and will remain illuminated as long as the
power supply is connected to the Sender
unit.
6 Link This LED indicator will glow bright
amber to indicate that the Sender unit is
communicating with the Receiver unit.
If this LED is not illuminated, inspect
the connection between the Sender and
Receiver unit.
7 HDMI In Use the included HDMI cable to connect a
Hi-Def source to this HDMI port.
8 RS-232 Connect the included 3.5mm mini-stereo-to-
DB-9 (female) adapter to this port. Connect
an RS-232 cable from the adapter to an
automation device.
9 IR Out Connect the included infrared IR emitter
(Gefen part no. EXT-IREMIT) from this port
to the IR sensor window of the source.
Getting Started