User manual

page | 12
Bidirectional IR Control
Controlling the Source from the Viewing Location
1. Connect the included IR extender to the IR In/Ext port on the Receiver unit. If using an
automation system, connect the 3.5mm mini-stereo connector from the IR In/Ext port on
the Receiver unit to the automation system.
2. Connect the included IR emitter from the IR Out port on the Sender unit to the
IR sensor window on the source device.
IR signals
Power
Link
5V DC HDMI Out
RS-232
IR
Out
HD over IP R
w/ RS-232 and 2-way IR
IR In/Ext
LAN Reset
EXT-HD2IRS-LANR
Gefen
Power
Link
5V DC HDMI In
RS-232
IR
Out
HD over IP S
w/ RS-232 and 2-way IR
IR In/Ext
LAN Reset
EXT-HD2IRS-LANS
Gefen
to HD display
CAT-5e cable (or better)
up to 330 feet (100 meters)
to LAN port
to HDMI Out port
HDMI cable
HD source
IR emitter
Network
Sender unit
Receiver unit
IR extender
or
from Automation
System
Basic Operation Basic Operation