User manual
page | 15
Displaying the IP Address
The IP addresses of both the Sender and Receiver unit are briey displayed during the
initialization process, before an image is displayed. To retrieve the IP address of a Sender
and/or Receiver unit, at any time, use the following procedure.
1. Disconnect the HDMI cable from the HDMI In port on the Sender unit. Do not
disconnect the HDMI cable from the Receiver unit.
2. After a few moments, the screen will go blank and the IP address of both the Sender
and Receiver unit will be displayed in the lower-right corner of the screen.
3. To display the source image, once again, reconnect the HDMI cable to the HDMI In
port on the Sender unit .
Waiting for video source - standby
FW: V1.31HS-Nov-08 779c
Local IP: 169.254.9.180
Remote IP: 169.254.6.212
ID: 02D5DDAC21EC
Local IP = Receiver unit
Remote IP = Sender unit
Basic Operation