User manual
page | 19
Web Interface
Setting the Password
Both the User and Administrator passwords can be changed. Each Sender and Receiver
unit can have a different password, if desired. To prevent unauthorized tampering of
conguration settings, it is highly recommended that the Administrator password be
changed as soon as each unit is congured. Passwords are case-sensitive.
The default password for Administrator is admin. The default password for User is user.
1. Access the Web interface for the Sender and Receiver unit. The password must be
set for each Sender and Receiver unit.
2. Log in as Administrator.
3. Click the System tab.
4. Enter the new password for the desired user name(s). In the example, below,
both the Administrator and User passwords are being changed.
5. Click the Change button under the appropriate user name.
6. The following message will be displayed, at the top of the page:
7. Return to the Login tab and login as with the new password. This step will
terminate the current session (using the old password), allowing the new password
to take effect.
Basic Operation