User manual

Setting the IP Mode
The HD over IP w/ RS-232 and 2-way IR can be set to Auto IP, DHCP, or Static IP mode.
By default, Sender and Receiver units are shipped in Auto IP mode. Auto IP mode is used
to directly connect a Sender and Receiver unit. In order to use the Sender and Receiver
units in a LAN environment, they must be set to either DHCP or Static IP mode.
Web Interface
page | 22
Receiver unit
HDMI Out
Sender unit
HDMI In
Receiver unit
HDMI Out
Sender unit
HDMI In
Network
Figure 2.2 - Auto IP mode: A Sender and Receiver directly connected to one
another.
Figure 2.3 - DHCP or Static IP mode: A Sender and Receiver unit connected to a
network (LAN).
Basic Operation Basic Operation