User manual

page | 27
Web Interface
Picture Quality Mode
The HD over IP w/ RS-232 and 2-way IR provides two video modes: Video Mode and
Graphic Mode. If the input signal is motion video, then use the Video Mode setting.
This will optimize the frame rate. If the input signal is a static image, then use the Graphic
Mode setting.
1. Access the Web interface for the Sender unit.
2. Log in as Administrator or User.
3. Click the Network tab.
4. Click the desired video mode button under the Picture Quality Mode window group.
The select button will turn blue.
5. The following message will be displayed, at the top of the page:
Basic Operation