User manual

page | 28
The HD over IP w/ RS-232 and 2-way IR features EDID Management. Before the source
can send video (and/or audio) data, the source device (connected to each Sender unit)
reads the EDID (Extended Display Identication Data) from the displays which are
connected to each Receiver unit. The EDID contains information about what type of
audio/video data can be sent by each source.
By default, the (downstream) EDID from the display, connected to the Receiver unit,
is used. However, under certain circumstances, it may be desirable to use the internal
EDID which is stored in the Sender unit.
Using the Internal EDID
1. Access the Web interface for the Sender unit.
2. Login as Administrator.
3. Click the Functions tab.
4. Click the Load Internal EDID button.
5. After a few moments, the following message will appear at the top of the page,
indicating that the new Serial over IP options have been applied.
Clicking the Save or Reboot button is not required for the changes to take effect.
EDID Management
Basic Operation Basic Operation