User manual

Operating Notes

• The Sender and Receiver for the HD over IP w/ RS-232 and 2-way IR are sold

separately. This User Manual describes how to connect and operate both Sender

and Receiver units.

• This product requires a Gigabit switch that supports 8k jumbo frames in order for

multicast mode to function correctly. If the LAN is not exclusively dedicated to this

product, then a managed switch is highly recommended.

• CAT-5e or CAT-6 cables should not exceed 330 feet (100 meters) between the

Sender / Receiver unit and the network.

• By default, all Sender and Receiver units are set to channel 0.

HD over IP w/ RS-232 and 2-way IR is a trademark of Gefen, LLC.

All trademarks are the property of their respective owners.

Gefen, LLC reserves the right to make changes in the hardware, packaging, and any accompanying documentation

without prior written notice.

This product uses UL or CE listed power supplies.