User manual

Any Sender or Receiver unit can be reset to factory-default settings using the Web
interface. If the Web interface for a Sender or Receiver unit cannot be accessed,
then refer to Manual Reset Procedure (page 56).
1. Access the Web interface for the Sender and Receiver unit. The password must be
set for each Sender and Receiver unit.
2. Log in as Administrator.
3. Click the System tab.
4. Click the Reset button.
5. The following message will be displayed in the Web interface, as the unit is reset.
When the unit is reset, it will automatically reboot.
When a Sender or Receiver unit is reset, it will be set to Auto IP mode. The unit that
was reset will now have a different IP address. To display the new IP address, refer to
Displaying the IP Address (page 40).
6. The reset process is complete.
Resetting a Unit
page | 40
Warning!
The following procedure will reset a Sender or Receiver unit to factory-default
settings. All current conguration information will be lost.
Basic Operation