User manual

page | 50

Functions tab

1 Load Internal EDID (Sender unit only)

Click this button to use the internal EDID. See EDID Management (page 28) for

details.

2 Copy EDID of Connected Display (Receiver unit only)

When enabled (checked), the Sender unit will use the downstream EDID. See EDID

Management (page 28) for details.

3 HDCP Enable (Sender unit only)

Controls the transmission of HDCP content from the source device. See Enabling or

Disabling HDCP (page 26) for details.

4 Enable Video over IP

Controls the video masking on the Receiver unit. See Enabling or Disabling Video

over IP (page 25) for details.

(continued on next page)

Web Interface Summary

Appendix