User manual

page | 56
Manual Reset Procedure
1. Disconnect the power from the unit.
2. Press and hold the Reset button using the end of a paperclip or other sharp
pointed object.
3. While depressing the Reset button, reconnect the power.
4. The Power LED indicator will begin to ash.
5. Wait until both the Power and Link LED indicators begin to alternately ash.
6. Release the Reset button.
7. Disconnect the power once again, then reconnect the power.
8. The unit is now reset to factory-default settings.
9. Repeat the above process for each Sender / Receiver unit.
Power
Link
5V DC HDMI In
RS-232
IR
Out
HD over IP S
w/ RS-232 and 2-way IR
IR In/Ext
LAN Reset
EXT-HD2IRS-LANS
Gefen
Reset button
Power
Link
5V DC HDMI Out
RS-232
IR
Out
HD over IP R
w/ RS-232 and 2-way IR
IR In/Ext
LAN Reset
EXT-HD2IRS-LANR
Gefen
Power LED
Link LED
Warning!
The following procedure will reset a Sender or Receiver unit to factory-default
settings. All current conguration information will be lost.
Appendix Appendix