Manualshelf

User manual

ManualsBrandsGefen ManualsAV extendersEXT-HDKVM-LANTX
51525354555657585960
page | 42
Operating the HD KVM over IP
The HD KVM over IP provides two video modes: Video Mode and Graphic Mode.
Consecutively pressing the Mode button on the Sender unit will toggle between Video
Mode and Graphic Mode.
► Video Mode
If the HDMI signal is motion video, then press the Mode button on the front panel of
the Sender unit until Video Mode is displayed. This mode will optimize the frame rate.
► Graphic Mode
If the HDMI signal is a static image, then press the Mode button on the front panel of
the Sender unit until Graphic Mode is displayed.
Video Mode
Setting the Video Mode
Graphic Mode