HDMI Super Booster Plus USER MANUAL www.gefen.com HDMI Super Booster Plus USER MANUAL www.gefen.
ASKING FOR ASSISTANCE Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday. Write To: Gefen Inc. C/O Customer Service 20600 Nordhoff St. Chatsworth, CA 91311 support@gefen.com www.gefen.com Notice Gefen Inc. reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. The HDMI Super Booster Plus is a trademark of Gefen Inc. © 2008 Gefen Inc.
TABLE OF CONTENTS 1 Introduction 2 Features 3 Panel Descriptions 4 Connecting and Operating the HDMI Super Booster Plus 5 Auto Equalization 6 Specifications 7 Warranty TABLE OF CONTENTS 1 Introduction 2 Features 3 Panel Descriptions 4 Connecting and Operating the HDMI Super Booster Plus 5 Auto Equalization 6 Specifications 7 Warranty
INTRODUCTION The Gefen HDMI Super Booster Plus is an attractive alternative to the traditional sender/receiver solutions for HD extension. The HDMI Super Booster Plus enables your standard “off the shelf” HDMI cable to transmit HDTV video plus multichannel digital audio in a single cable way beyond the limited HDMI specification of 15-feet. Up to 200 feet can be easily traversed using your HDMI cable plus a HDMI Super Booster Plus.
FEATURES Features • Perfect digital high definition video sent over long stretches of HDMI cables • Locate an HDMI display up to 200 feet away from any HDTV source • Supports resolutions up to 1080p, 2K, and 1920 x 1200 • HDMI/HDCP compliant Includes: (1) HDMI Super Booster Plus (1) 5V DC Power Supply (1) User’s Manual 2 FEATURES Features • Perfect digital high definition video sent over long stretches of HDMI cables • Locate an HDMI display up to 200 feet away from any HDTV source • Supports resolution
PANEL LAYOUT Front Panel Power LED Indicator Manual EQ Adjustment HDMI In Back Panel +5V DC In HDMI Out 3 PANEL LAYOUT Front Panel Power LED Indicator Manual EQ Adjustment HDMI In Back Panel +5V DC In HDMI Out 3
CONNECTING AND OPERATING THE HDMI SUPER BOOSTER PLUS 1. Connect the long HDMI cable from the source into the “HDMI In” on the front of the HDMI Super Booster Plus. The HDMI Super Booster Plus is placed next to your display to regenerate the HDMI signal. 2. Connect a short HDMI cable from the “HDMI Out” connection in the back of the HDMI Super Booster Plus to your display or projector 3. Plug the 5V DC power supply into the HDMI Super Booster Plus. 4.
AUTO EQUALIZATION ON 1 Remove the silver tape to expose the Dip Switch Bank 2 Manual EQ Long Cable ON 1 Auto EQ ON 2 Manual EQ Short Cable Dip Switch 2 can be used to turn on the automatic equalization function. Use this setting for ease of setup as this mode will automatically tune out unwanted video noise. To do this, turn Dip Switch 2 to the ON position. No manual adjustments to the EQ can be made in this mode using the EQ Trim Pot on the front of the unit.
SPECIFICATIONS Video Amplifier Bandwidth ............................................................................ 165 MHz Input Video Signal ....................................................................................1.2 Volts p-p Input DDC Signal ............................................................................. 5 Volts p-p (TTL) Maximum Single Link Range ....................................................... 1920 x 1200 x 60hz HDMI Input/Output Connector Type ......................
