User manual

Switching/Routing Binary Table

ASCII RMT2-IR

Button

Binary

1 1 0011 0001

2 2 0011 0010

EDID Management Modes

All DIP switches inside the unit must be in their default OFF position. Use the ASCII

commands below to change the EDID modes. For a description of each mode

please see page 8.

ASCII EDID Mode

m0 0

m1 1

m2 2

m3 3

m4 4

m5 5

m6 6

m7 7

IR Remote Channel Conﬁ guration

All DIP switches inside the unit must be in their default OFF position. Use the ASCII

commands below to change the IR code channel. Please ensure that the IR remote

channel on the RMT-2IR matches any channel that is set by these commands. For a

description of the IR code channel conﬁ guration please see page 6.

ASCII Remote Channel

r1 1

r2 2

r3 3

r4 4

RS-232 SERIAL COMMUNICATION COMMANDS