User manual

CONNECTING THE 2:8 HDMI DISTRIBUTION AMPLIFIER

OPERATING THE 2:8 HDMI DISTRIBUTION AMPLIFIER

1. Connect the supplied cable from the HDMI source into the HDMI input port 1 of the

2:8 HDMI Distribution Ampliﬁ er.

2. Connect a second HDMI source to HDMI input port 2 on the 2:8 HDMI Distribution

Ampliﬁ er using a user supplied HDMI cable.

3. Connect the display(s) (up to eight) to the HDMI output port(s) of the 2:8 HDMI

Distribution Ampliﬁ er using user supplied cable(s)

4. Plug the 24V DC power supply into the 2:8 HDMI Distribution Ampliﬁ er.

Switching between the inputs on the 2:8 HDMI Distribution Ampliﬁ er is done using either

the supplied RMT2-IR remote or the RJ11 to serial interface.

IR Remote

Pressing button one on the remote will select the HDMI source that is connected to

HDMI input port one. Pressing two on the remote will select the HDMI source that is

connected to HDMI input port two.

RJ11 To Serial Control Interface

Please see the diagram on page 9 for the RJ11 serial control interface pin conﬁ guration.

How to Connect the 2:8 HDMI Distribution Ampliﬁ er