TV Cables User's Manual

8X4 CAT-5 MATRIX FOR HDMI RS-232 COMMANDS

Switching/Routing Binary Table

ASCII

Command

Input Output

ASCII

Command

Input Output

A1 or a1 1A 1 C1 or c1 1A 3

A2 or a2 1B 1 C2 or c2 1B 3

A3 or a3 2A 1 C3 or c3 2A 3

A4 or a4 2B 1 C4 or c4 2B 3

A5 or a5 3A 1 C5 or c5 3A 3

A6 or a6 3B 1 C6 or c6 3B 3

A7 or a7 4A 1 C7 or c7 4A 3

A8 or a8 4B 1 C8 or c8 4B 3

B1 or b1 1A 2 D1 or d1 1A 4

B2 or b2 1B 2 D2 or d2 1B 4

B3 or b3 2A 2 D3 or d3 2A 4

B4 or b4 2B 2 D4 or d4 2B 4

B5 or b5 3A 2 D5 or d5 3A 4

B6 or b6 3B 2 D6 or d6 3B 4

B7 or b7 4A 2 D7 or d7 4A 4

B8 or b8 4B 2 D8 or d8 4B 4

EDID Management Modes

DIP switches 1, 2, 5, and 7 inside the unit must be in their default OFF position for

the following commands to work. Use the ASCII commands below to change the

EDID modes. For a description of each mode please see page 12.

ASCII EDID Mode ASCII EDID Mode

m00m55

m11m66

m22m77

m33m88

m44m99

Print Matrix Routing State

The following command will print the current matrix routing state.

ASCII