User manual

USING A PRE-PROGRAMMED EDID
USING A PRE-PROGRAMMED EDID
EDID Resolutions - Aspect Ratio Refresh Rate Audio Setting DIP SWITCHES
4
720 x 480p 16:9 1440 x 480p 16:9
59.94/60 hz
Linear PCM 8
Channel
1234
1280 x 720p 16:9 1920 x 1080p 16:9
OFF OFF ON N/A
1920 x 1080i 16:9 (native)
5
720 x 480p 16:9 1440 x 480p 16:9
59.94/60 hz
Linear PCM 2
Linear PCM 8
Linear DTS
Linear AC-3
1234
1280 x 720p 16:9 1920 x 1080i 16:9
ON OFF ON N/A
1920 x 1080p 16:9 (native)
1. Choose the desired EDID from the table above and enable the corresponding
DIP SWITCHES.
2. Follow steps 3 through 8 in the section CONNECTING AND OPERATING THE
HDMI DETECTIVE PLUS (Page 4 and 5)
NOTE: Only when the DIP SWITCHES are set in the combinations above will an
pre-programmed EDID be written to the HDMI Detective Plus. Please set all DIP
SWITCHES to the OFF position to enable the default setting and record an EDID
from an attached display.
EDID Resolutions - Aspect Ratio Refresh Rate Audio Setting DIP SWITCHES
4
720 x 480p 16:9 1440 x 480p 16:9
59.94/60 hz
Linear PCM 8
Channel
1234
1280 x 720p 16:9 1920 x 1080p 16:9
OFF OFF ON N/A
1920 x 1080i 16:9 (native)
5
720 x 480p 16:9 1440 x 480p 16:9
59.94/60 hz
Linear PCM 2
Linear PCM 8
Linear DTS
Linear AC-3
1234
1280 x 720p 16:9 1920 x 1080i 16:9
ON OFF ON N/A
1920 x 1080p 16:9 (native)
1. Choose the desired EDID from the table above and enable the corresponding
DIP SWITCHES.
2. Follow steps 3 through 8 in the section CONNECTING AND OPERATING THE
HDMI DETECTIVE PLUS (Page 4 and 5)
NOTE: Only when the DIP SWITCHES are set in the combinations above will an
pre-programmed EDID be written to the HDMI Detective Plus. Please set all DIP
SWITCHES to the OFF position to enable the default setting and record an EDID
from an attached display.
7
7