Manualshelf

User manual

ManualsBrandsGefen Manualscable interface/gender adaptersEXT-HDMI-EDIDP
45678910111213
Write protection
switch
WRITE PROTECTING THE HDMI DETECTIVE
WRITE PROTECTING THE HDMI DETECTIVE
Once the HDMI Detective Plus is programmed and working, you can write protect
the unit to prevent an accidental overwrite. This is done by simply moving the write
protect switch to the D (write disabled) position. By default, the unit is shipped in the
E (write enabled) position. This is done so that the unit is ready to be programmed
right out of the box. Whenever the unit is going to be programmed, make sure that
the switch is in the “E” position, otherwise the procedure will not work. The power
LED will fl ash in alternating green and red colors to indicate that the HDMI Detective
Plus is currently write protected.
Once the HDMI Detective Plus is programmed and working, you can write protect
the unit to prevent an accidental overwrite. This is done by simply moving the write
protect switch to the D (write disabled) position. By default, the unit is shipped in the
E (write enabled) position. This is done so that the unit is ready to be programmed
right out of the box. Whenever the unit is going to be programmed, make sure that
the switch is in the “E” position, otherwise the procedure will not work. The power
LED will fl ash in alternating green and red colors to indicate that the HDMI Detective
Plus is currently write protected.
Write protection
switch
9
9