® HDMI1.3 to 3GSDI Scaler EXT-HDMI1.3-2-3GSDIS User’s Manual www.gefen.
ASKING FOR ASSISTANCE Technical Support: Telephone Fax (818) 772-9100 (800) 545-6900 (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday thru Friday PST Write To: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com support@gefen.com Notice Gefen, LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. HDMI1.3 to 3GSDI Scaler is a trademark of Gefen, LLC © 2010 Gefen, LLC.
TABLE OF CONTENTS 1 lntroduction / How It Works 2 Features 3 Panel Descriptions 4 Menu Functions 5 Menu Functions (Continued) 6 Supported Input Resolutions 7 Supported Output Resolutions 8 Operation Notes 9 Remote Control Installation & Firmware Update Procedure 10 Specifications 11 Warranty
INTRODUCTION The Gefen HDMI1.3 to 3GSDI Scaler is a recent addition to our HDSDI conversion line incorporating HDMI conversion scaled to your choice of SD/HDSDI/3GSDI Single / Dual Link modes or 3G-SDI level A/B. Resolutions of up to 1080p are supported over the HDSDI link for those that want true “High Definition”. Multichannel HDMI embedded audio is supported.
FEATURES • 10-bit resolution for greater precision and dynamic range • Proprietary motion adaptive video de-interlacing with edge interpolation for SD/HD formats • Supports 8 channels of SDI audio • Advanced noise reduction and detail enhancement • Fully integrated sprite based multi-plane OSD controller • Frame rate conversion to / from any refresh rate • Pattern mode w/ color bars & coarse hatch patterns • Color correction • Noise Reduction • Detail Enhancement • Brightness Adjustmen
PANEL DESCRIPTIONS Front Panel Infrared Eye 3G-SDI Indicator LED RS-232 Control Port 5V Locking Power Jack Back Panel Genlock Ref.
MENU FUNCTIONS Aspect: -Full Screen: Stretches input to fill the Monitor -Letter / Pillar Box: Sets the aspect ratio to fit a letter or pillar box format -Panoramic: Panoramic Zoom feature -Extract: Feature to magnify the signal -Exact Size: Adjusts signal magnification. -Horizontal / Vertical Position: Moves magnified signal Up/Down -Through: Feature to crop the signal - H/V Size: Horizontally and Vertically contracts or expands the cropping viewport.
MENU FUNCTIONS, CONTINUED Input:, continued: - Remote Channel: Changes the lR code of the HDMI to 3GSDI Scaler to one of 4 different settings between 0 and 3. When the remote channel is changed, DIP switches in the 8-button remote must be changed to the corresponding codes in order to continue operating the Scaler. (Please see the Installation page for the RMT-8HDS-IR remote control for more information). - Non-Standard Sync: Allows the box to sync to non-standard video formats.
SUPPORTED INPUT RESOLUTIONS Note: Since the scaler processor (VXP) is 10-bit, all 12-bit input formats will be truncated to 10 bits. Rate Type SD Video HD n/a Video Graphics Resolution / Frame Rate 480i & 480p(59.94) 576i & 576p(50) 720p(23.97/24/25/29.97/30/50/59.94/60) 1080i(50/50M/59.94/60) 1035i(59.94/60) 1080p(23.98/24/25/29.97/30) 1080p(50/50M/59.94/60) 2K(23.
SUPPORTED OUTPUT RESOLUTIONS SDI Output Formats Supported are shown in the following table: Rate Type Resolution / Frame Rate Color pace Bit Depth Support SD Video 480i & 480p (59.94) YCbCr 4:2:2 8/10 Yes YCbCr 4:2:2 8/10 Yes YCbCr 4:2:2 8/10 Yes 8/10 Yes 576i & 576p (50) Dual Link Interlaced SD Video 480p 576p 720p(23.97/24/25/29.97/30/50 /59.94/60) 1080i(50/50M/59.94/60) 1035i (59.94/60) HD Video 1080p (23.98/24/25/29.97/30) 1080sf(23.98/24/25/29.97/30) 2K p(23.97/24) 2K sf(23.
OPERATION NOTES Upon power up, the HDMI to HDSDI Scaler will automatically detect the input format of the input. The unit is controlled using the included remote.
RMT-8HDS REMOTE CONTROL INSTALLATION 1. Remove battery cover from the back of the RMT-8HDS-IR remote. 2. Verify that dip switches 1 & 2 are in the down (OFF) position. 3. Insert the battery, hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down. 4. Test the RMT-8HDS-IR remote by pressing ONLY one button at a time. The indicator light on the remote will flash once each time you press a button.
SPECIFICATIONS Input Video Bandwidth...............................................................................225 MHz Output Video Bandwidth......................................................................2 x 3.0 Gbps Maximum Input Resolution.....................................................................2048x1080 Maximum Output Resolution................................................................. 2048x1080 HDMI Connector..................................................................
WARRANTY Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.
*ma-HDMI1.3-2-3gsdiS* Rev X9 20600 Nordhoff St., Chatsworth CA 91311 1-800-545-6900 818-772-9100 www.gefen.com Pb fax: 818-772-9120 support@gefen.
