Owners manual

page | 4
Getting Started Getting Started
Connection Instructions
► Video
1. Use the included locking HDMI cable to connect an Ultra HD source to the Input port
on the rear panel of the splitter.
2. Connect locking HDMI cables (not included), to Out 1 - Out 4 ports on the rear panel
of the splitter. The HDMI cables can then be connected in any of the following ways:
• Connect the HDMI cables to Ultra HD displays.
• Connect the HDMI cables to additional EXT-UHD600 Splitters for cascading
purposes.
• Connect one of the HDMI cables to an Ultra HD display and the other cable to
another EXT-UHD600 Splitter.
► Power
3. Connect the included 5V DC locking power supply to the 5V DC power receptacle on
the rear panel of the splitter.
4. Connect the power supply to an available electrical outlet.
Installation
Important
Cable quality is critical when handling 600 MHz HDMI signals. We highly
recommend Gefen Locking HDMI cables. They have been designed and
tested to work at 600 MHz and reliably transport the full 18 Gbps throughput
of HDMI 2.0.