Brochure

ManualsBrandsGefen ManualsDistribution Amplifiers (DA's)UHD 4K 600 MHz 1x8 HDMI Splitter with HDR Support

Designing systems capable of distributing 4K Ultra High Definition media requires support for the content of today, and headroom for

the content of tomorrow. Gefen’s EXT-UHD600 Series of splitters take HDMI 2.0 to its highest specification of 4K 60 Hz at 4:4:4

chroma subsampling, along with HDR (High Dynamic Range) support. They go beyond the requirements of typical 4K systems, delivering

stunning Ultra HD and DCI/Cinema picture up to 4096 x 2160 pixels at 60 frames per second without subsampling color. This ensures

that the scene shown on the display is every bit as brilliant as the picture that the camera captured. HDR lets every subtle nuanced

gradation of each pixel play out across the screen in immersive clarity. Gefen’s EXT-UHD600 product line creates a seamless bridge

between the digital media of yesterday, today, and tomorrow. Supporting the digital rights management standard for Ultra High Defini-

tion content, HDCP 2.2, as well as the legacy HDCP 1.4, Gefen’s EXT-UHD600 products can handle the signal routing needs for both

existing and new components in commercial and residential AV systems. Highest performance multichannel digital audio including 7.1

channels of LPCM and HBR (High Bit Rate) digital audio formats such as Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master

Audio™ are also supported. These splitters have been specifically designed to support multiple layers of cascading** for flawless perfor-

mance in large video distribution and signage applications, supporting up to hundreds of displays. Gefen’s exclusive Long Reach Power

(LRP) feature provides 5V at 500 mA (as opposed to HDMI standard 55 mA) on pin 18 of HDMI outputs 1 and 2. This enhanced current

capability enables select extender devices to be powered through their HDMI input port without the need for an external power supply.

Gefen’s EXT-UHD600 product line was designed to work with Gefen’s Syner-G™ software suite. EDID and HDCP management, status

monitoring, and firmware updates can be done in minutes using the Gefen Syner-G™ software. The Gefen EXT-UHD600-18 splitter

features a 1U tall, rack-mountable enclosure that can also be placed on a shelf. It accommodates Gefen locking HDMI cables for

secure connections.

** Actual cascading layer count is dependent on the robustness of the HDMI source output section and the HDMI display input section. HDR reduces cascading ability.

Ultra HD 600 MHz 1:8 Splitter for HDMI w/ HDR

4K 60 Hz, 4:4:4

EXT-UHD600-18

60Hz

4:4:4

600 MHz

4K ULTRA

1080P

Page 1 of 2

VER. A1

EXT-UHD600-18

CINEMA

DCI, 4096 x 2160, 30Hz

CINEMA

DCI

, 4

096

216

30H

HDCP

2.2

Deep Color Support

High Dynamic Range

Summary of content (2 pages)

PAGE 1
Ultra HD 600 MHz 1:8 Splitter for HDMI w/ HDR 4K 60 Hz, 4:4:4 EXT-UHD600-18 HDCP 2.2 4K CINEMA CINEMA MA DCI, 4096 x 2160, 30Hz DCI,, 4096 x 216 DCI 2160, 0, 30H 30Hzz 600 MHz 4K ULTRA 60Hz, 4:4:4 H D R High Dynamic Range 1080P Deep Color Support Designing systems capable of distributing 4K Ultra High Definition media requires support for the content of today, and headroom for the content of tomorrow. Gefen’s EXT-UHD600 Series of splitters take HDMI 2.
PAGE 2
Features* • • • • • • • • • • • • • • • • • • Simultaneously displays an Ultra Hi-Def source on up to eight Ultra HD displays Specifically designed to support multiple layers of splitting/cascading** in large video distribution and signage applications, supporting up to hundreds of displays Supports resolutions up to 4K DCI-Cinema (4096 x 2160 at 60 Hz, 4:4:4), 4K Ultra HD (3860 x 2160 at 60Hz, 4:4:4), 1080p Full HD, & 1920x1200 (WUXGA) Supports HDCP 2.2 and 1.