User manual

CONNECTING AND OPERATING THE 1:2 VGA HUB

How to Connect the 1:2 VGA Hub to your devices

1- Connect the supplied VGA cable from the VGA device into the 1:2 VGA Hub

Input.

2- Connect the cables from your displays (monitor or projector) into the VGA Out

slots in the back of the 1:2 VGA Hub

4- Plug the 5v power supply into the 1:2 VGA Hub.

5- Plug the 5v wall mount power supply into the wall outlet.

NOTE: Display information (EDID) is not sent back to the source. Standard VESA

resolutions should be output by most computers without the need of an EDID.

If using a non-VESA standard resolution or if EDID is needed, an EDID storage

and relay device is necessary. Gefen recommends the use of a DVI Detective

(part# EXT-DVI-EDID, EXT-DVI-EDIDN, or EXT-DVI-EDIDP) with two VGA to DVI

adapters.