User manual
page | 109
Advanced Operation
Commands
#set_vert_refresh_rate
Sets the vertical refresh rate and saves it to the specied preset. param1 is a oating-point
value and can be specied up to three decimal places.
Syntax
#set_vert_refresh_rate param1 param2
Parameters
param1 Refresh rate [0.000 ... 9999.000]
param2 Preset [0 ... 5]
Example
#set_vert_refresh_rate 60 1
VERTICAL REFRESH RATE 60 SAVED TO PRESET 2
Related Commands
#get_timing_preset
#set_horz_active
#set_horz_back_porch
#set_horz_front_porch
#set_horz_sync_polarity
#set_horz_scan_rate
#set_horz_sync_width
#set_horz_total
#set_pixel_clock
#set_vert_active
#set_vert_back_porch
#set_vert_front_porch
#set_vert_sync_polarity
#set_vert_sync_width
#set_vert_total