User manual
page | 12
Output Resolution
1. Press the Menu button on the front panel. The Output Setup option will be
highlighted.
2. Press the Menu button to access the Output Setup submenu. The Output Resolu.
option will be highlighted.
3. Press the Menu button to select the Output Resolu. option.
4. The Output Resolu. selection box be displayed:
5. Use the Up or Dn button to select the desired resolution. For a list of available output
resolutions that are supported by the VGA to DVI Scaler/Converter, see Menu System
Summary (page 118).
6. After the desired output resolution is selected, press the Menu button to conrm the
change.
7. After the output resolution has been changed, the current input and output resolution
will be displayed above the Output Resolu. selection box:
(continued on next page)
Basic Operation
Menu System
[ Auto-Detect ]
a
a
Output Resolu.
Warning
Before changing this setting, make sure that the connected display can
support the selected output resolution. If an unsupported resolution is
selected, the unit will need to be reset using the DIP switch on the bottom of
the unit. See DIP Switch Conguration (page 40) for more information.
Input 1600x1200p60
Output 640x480p60
Basic Operation
Gefen
Converter
----------------
1.Output Setup
2.Picture
3.Adjustment
4.System
5.Test Patterns
6.Exit
Output Resolu.
<- Back