User manual
page | 18
Basic Operation
Menu System
Gefen
Converter
----------------
1.Output Setup
2.Picture
3.Adjustment
4.System
5.Test Patterns
6.Exit
Contrast
Brightness
Saturation
Hue
Color Range
Color Temp.
Color Balance
Edge Enhance
Sharpness
<- Back
[ Limited ]
a
a
Color Range
Color Range
1. Press the Menu button on the front panel. The Output Setup option will be
highlighted.
2. Use the Up or Dn button to highlight the Picture option.
3. Press the Menu button to access the Picture submenu. The Contrast option will be
highlighted.
4. Use the Up or Dn button to highlight the Color Range option.
5. Press the Menu button to select the Color Range option.
6. The Color Range selection box will be displayed:
7. Use the Up or Dn button to select between Limited or Full.
8. Press the Menu button to conrm the change and return to the Picture submenu.
9. Use the Up or Dn button to select the <- Back option.
10. Press the Menu button.
11. Use the Up or Dn button to select the Exit option
12. Press the Menu button to exit the main menu.
Basic Operation