User manual

page | 24
Aspect Ratio
1. Press the Menu button on the front panel. The Output Setup option will be
highlighted.
2. Use the Up or Dn button to highlight the Adjustment option.
3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan
option will be highlighted.
4. Use the Up or Dn button to highlight the Aspect Ratio option.
5. Press the Menu button to select the Aspect Ratio option.
6. The Aspect Ratio selection box will be displayed:
7. Use the Up or Dn button to select between Source, 16:9, 4:3, or Stretch.
8. Press the Menu button to conrm the change and return to the Adjustment submenu.
9. Use the Up or Dn button to select the <- Back option.
10. Press the Menu button.
11. Use the Up or Dn button to select the Exit option
12. Press the Menu button to exit the main menu.
Basic Operation
Menu System
[ Source ]
a a
Aspect Ratio
Basic Operation
Gefen
Converter
----------------
1.Output Setup
2.Picture
3.Adjustment
4.System
5.Test Patterns
6.Exit
Under/Over Scan
Aspect Ratio
H-Mirror
V-Mirror
H-Shift
V-Shift
Phase
<- Back