User manual

page | 25
Horizontal Mirror
1. Press the Menu button on the front panel. The Output Setup option will be
highlighted.
2. Use the Up or Dn button to highlight the Adjustment option.
3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan
option will be highlighted.
4. Use the Up or Dn button to highlight the H-Mirror option.
5. Press the Menu button to select the H-Mirror option.
6. The H-Mirror selection box will be displayed:
7. Use the Up or Dn button to toggle between On and Off. When the H-Mirror
option is set to On, then the picture will be ipped horizontally (about the Y-axis).
(continued on next page)
Basic Operation
Menu System
[ Off ]
a a
H-Mirror
[ Off ]
a a
H-Mirror
[ On ]
a a
H-Mirror
*Preferred
*Preferred
Gefen
Converter
----------------
1.Output Setup
2.Picture
3.Adjustment
4.System
5.Test Patterns
6.Exit
Under/Over Scan
Aspect Ratio
H-Mirror
V-Mirror
H-Shift
V-Shift
Phase
<- Back