User manual
page | 31
Basic Operation
Menu System
Phase
1. Press the Menu button on the front panel. The Output Setup option will be
highlighted.
2. Use the Up or Dn button to highlight the Adjustment option.
3. Press the Menu button to access the Adjustment submenu. The Under/Over Scan
option will be highlighted.
4. Use the Up or Dn button to highlight the Phase option.
5. Press the Menu button to select the Phase option.
6. The Phase selection box will be displayed:
7. Use the Up or Dn button to adjust the phase.
8. Press the Menu button to conrm the change and return to the Adjustment submenu.
9. Use the Up or Dn button to select the <- Back option.
10. Press the Menu button.
11. Use the Up or Dn button to select the Exit option
12. Press the Menu button to exit the main menu.
Gefen
Converter
----------------
1.Output Setup
2.Picture
3.Adjustment
4.System
5.Test Patterns
6.Exit
Under/Over Scan
Aspect Ratio
H-Mirror
V-Mirror
H-Shift
V-Shift
Phase
<- Back
a
a
Phase Auto