User manual
page | 46
Commands
Command Description
#factory_res
Resets the unit to factory-default settings
#fw_upgrade
Enables the rmware upgrade mode
#get_aspect_ratio
Displays the current aspect ratio setting
#get_brightness
Displays the current brightness setting
#get_color_balance
Displays the value of the specied color channel
#get_color_range
Displays the current color range setting
#get_color_temp
Displays the current color temperature setting
#get_contrast
Displays the current contrast setting
#get_display_notify
Displays the current display-notify setting
#get_edge_enhance
Displays the current edge-enhance setting
#get_rmware_version
Displays the rmware version number
#get_horizontal_mirror
Displays the state of the horizontal mirror setting
#get_horizontal_shift
Displays the state of the horizontal shift setting
#get_hue
Displays the current hue setting
#get_input_resolution
Displays the current input resolution
#get_osd_timeout
Displays the current OSD timeout value
#get_output_res
Displays the current output resolution
#get_phase
Displays the current phase setting
#get_picture_settings
Displays the current picture settings
#get_saturation
Displays the current saturation setting
#get_sharpness
Displays the current sharpness setting
#get_test_patterns
Displays the currently active test pattern
#get_timing_preset
Display the timing of the selected preset
#get_uo_scan
Displays the current underscan/overscan value
#get_vertical_mirror
Displays the current vertical mirror state
#get_vertical_shift
Displays the current vertical shift value
#get_video_output
Displays the current video output settings
#get_video_settings
Displays the current video settings
#help
Displays all available commands
#reboot
Reboots the unit
#set_aspect_ratio
Sets the aspect ratio
#set_brightness
Sets the picture brightness
#set_color_balance
Sets the color balance
#set_color_range
Set the output color range
(continued on next page)
Advanced Operation
Advanced Operation