User manual
page | 47
Commands
Command Description
#set_color_temp
Sets the color temperature
#set_contrast
Sets the picture contrast
#set_display_notify
Enables / disables display notiî‚¿cations
#set_edge_enhance
Sets the edge enhancement
#set_horizontal_mirror
Sets horizontal mirror
#set_horizontal_shift
Sets horizontal shift
#set_horz_active
Sets the horizontal active
#set_horz_back_porch
Sets the horizontal back porch
#set_horz_front_porch
Sets the horizontal front porch
#set_horz_scan_rate
Sets the horizontal scan rate
#set_horz_sync_polarity
Sets the horizontal sync polarity
#set_horz_sync_width
Sets the horizontal sync width
#set_horz_total
Sets the total horizontal pixels
#set_hue
Sets the picture hue
#set_osd_timeout
Sets the OSD (On-Screen Display) timeout
#set_output_res
Sets the output resolution
#set_phase
Sets the phase adjustment
#set_pixel_clock
Sets the pixel clock
#set_saturation
Sets the picture saturation
#set_sharpness
Sets the picture sharpness
#set_test_patterns
Set the test pattern
#set_uo_scan
Set underscan / overscan
#set_vert_active
Sets the vertical active pixels
#set_vert_back_porch
Sets the vertical back porch
#set_vert_front_porch
Sets the vertical front porch
#set_vert_refresh_rate
Sets the vertical refresh rate
#set_vert_sync_polarity
Sets the vertical sync polarity
#set_vert_sync_width
Sets the vertical sync width
#set_vert_total
Sets the total vertical pixels
#set_vertical_mirror
Sets the vertical mirror
#set_vertical_shift
Sets the vertical shift
Advanced Operation