User manual

page | 76
Advanced Operation
Commands
#get_video_settings
Displays the current video settings. This command provides the same information as
consecutively executing the #get_uo_scan, #get_aspect_ratio,
#get_horizontal_mirror, #get_vertical_mirror, #get_horiziontal_shift,
#get_vertical_shift, and #get_phase commands.
Syntax
#get_video_settings
Parameters
None
Example
#get_video_settings
UNDER/OVER SCAN IS OFF
ASPECT RATIO IS Source
HORIZONTAL MIRROR IS Off
VERTICAL MIRROR IS Off
HORIZONTAL SHIFT IS OFF
VERTICAL SHIFT IS OFF
PHASE IS AUTO
Related Commands
#get_uo_scan
#get_aspect_ratio
#get_horizontal_mirror
#get_horizontal_shift
#get_phase
#get_vertical_mirror
#get_vertical_shift
#set_aspect_ratio
#set_horizontal_mirror
#set_horizontal_shift
#set_phase
#set_vertical_mirror
#set_vertical_shift
Advanced Operation