User manual

page | 85
Advanced Operation
Commands
#set_display_notify
Enables / disables the input/output resolution information dialog. When set to On, the input/
output resolution information dialog will be displayed, momentarily, whenever the source is
disconnected / reconnected to the VGA to DVI Scaler/Converter or if a change to the output
is made. When set to Off, the information dialog will not be displayed.
Syntax
#set_display_notify param1
Parameters
param1 State [0 ... 1]
param1 Description
0
Off
1
On
Example
#set_display_notify 1
DISPLAY NOTIFICATIONS SET TO On
Related Commands
#get_display_notify