User manual

page | 86
Advanced Operation
Commands
#set_edge_enhance
Sets the picture edge enhancement (sharpness) threshold. The Mid and Max settings are
sharpness presets. To set the sharpness to a specic setting, set param1 = 3, then use the
#set_sharpness command to set the sharpness value.
Syntax
#set_edge_enhance param1
Parameters
param1 Edge detail [0 ... 3]
param1 Description
0
Off
1
Mid
2
Max
3
User
Example
#set_edge_enhance 2
PICTURE EDGE ENHANCEMENT SET TO Max
Related Commands
#get_edge_enhance
#set_sharpness
Advanced Operation