User manual

page | 103
Advanced Operation
Commands
#set_osd_timeout
Sets the OSD (On-Screen Display) time-out delay in seconds. If param1 = 0, then the
OSD timeout will be set to “off”. The OSD will be displayed until it is exited, manually.
See Moving around within the Menu System (page 9) for more information on how to
manually exit the menu system.
Syntax
#set_osd_timeout param1
Parameters
param1 Timeout [0, 5 ... 60]
Example
#set_osd_timeout 10
OSD TIMEOUT IS SET TO 10 SECONDS
Related Commands
#get_osd_timeout