User manual

page | 16
Basic Operation Basic Operation
Menu System
Output Mode
1. Press the Menu button on the front panel. The Output Setup option will be
highlighted.
2. Press the Menu button to access the Output Setup submenu. The Output Resolu.
option will be highlighted.
3. Use the Up or Dn button to highlight the Output Mode option.
4. Press the Menu button to select the Output Mode option.
5. The Output Mode selection box will be displayed:
6. Use the Up or Dn button to select between Auto-Detect, HDMI, or DVI.
7. After the desired output mode is selected, press the Menu button to conrm the
change.
8. The current input and output resolution will be displayed above the current output
mode selection.
(continued on next page)
Gefen
Converter
----------------
1.Output Setup
2.Picture
3.Adjustment
4.System
5.Test Patterns
6.Exit
Output Resolu.
Output Color
Output Mode
<- Back
[ Auto-Detect ]
a a
Output Mode
Input 1600x1200p60
Output 640x480p60
Information
The input/output resolution information dialog will only be displayed if Display
Notify is set to On. See Display Notify (page 37) for more information.