User manual

page | 37
Display Notify
1. Press the Menu button on the front panel. The Output Setup option will be
highlighted.
2. Use the Up or Dn button to highlight the System option.
3. Press the Menu button to access the System submenu. The OSD Timeout option
will be highlighted.
4. Use the Up or Dn button to highlight the Display Notify option.
5. Press the Menu button to select the Display Notify option.
6. The Display Notify selection box will be displayed:
7. Use the Up or Dn button to toggle between On and Off. When Display Notify
is set to On, then the input/output resolution information dialog will be displayed,
momentarily, whenever the VGA & Audio to HDMI Scaler/Converter is disconnected
from the source or display:
In addition, the following operations also trigger the input/output resolution
information dialog: Output Resolution (page 12), Output Color (page 14), or
Output Mode (page 16). When set to Off, the input/output resolution information
dialog is never displayed.
(continued on next page)
Basic Operation
Menu System
Gefen
Converter
----------------
1.Output Setup
2.Picture
3.Adjustment
4.System
5.Test Patterns
6.Exit
OSD Timeout
Display Notify
Input Res.Info
F/W Version
Factory Reset
<- Back
[ On ]
a a
Display Notify
Input 1600x1200p60
Output 640x480p60