User manual
page | 30
USB under Unicast Mode
When connecting USB devices to the VGA KVM over IP, the functionality is similar to that
of video and RS-232.
As an example, we will start with our original diagram and connect a computer to Sender
unit S2 and a keyboard and mouse device to Receiver unit R2. This will allow us to control
the computer from the Receiver unit.
Figure 2.9 - Using USB devices under unicast mode.
1. Make sure the desired Sender and Receiver units are set to unicast mode. Refer to
Conî‚¿guring Unicast Mode if necessary.
2. Access the Web interface for the Sender unit.
3. Click the Functions tab.
LAN
Receiver unit
Receiver unit
VGA Out
USB cable
Computer
VGA Out
Sender unit
Sender unit
Sender unit
VGA In
VGA In
VGA In
07
07
02
05
09
R
1
S
1
S
2
S
3
R
2
Operating the VGA KVM over IP
USB Control
NOTE: By default, the VGA KVM over IP Sender and Receiver units
are shipped in unicast mode.