User manual

7
RECEIVER UNIT DESCRIPTIONS
1 Locking VGA Port
Connect a VGA source device to this VGA port.
2 RS-232 Port
Connect the RS-232 device to this port.
3 Brightness Trimpot
Adjusts the brightness of the picture.
4 Power Indicator
This LED will turn bright red once the included 5V DC power supply has
been properly connected to the unit and the locking power supply has been
connected to an available electrical outlet.
5 5V DC Power Connector
Connect the included 5V DC power supply to this connector.
6 CAT-5 Input Jack
Connects the Sender Unit to the Receiver Unit using CAT-5 cabling.